Recent Articles

How Not to Clean a Clock Movement!

October 7, 2007 | By | Reply More
How Not to Clean a Clock Movement!

I had an Ansonia iron case mantel clock for sale in my shop. It ran, but needed to be overhauled, which I planned to do when someone bought it. A man who tinkered with clocks came in and bought it it as-is, wanting to repair it himself. It was a Friday afternoon. Monday morning he […]

Read More

Last updated October 7, 2007

Ingraham Tambour with Quick Release Dial

October 7, 2007 | By | 1 Reply More
Ingraham Tambour with Quick Release Dial

The dial on this Ingraham tambour can be removed very quickly. Instead of the 4 usual screws holding the dial pan to the case, it has 4 studs fastened in the case front, and 4 semi-circular openings in the side of the dial pan which snap over the studs. The back door of the case […]

Read More

Last updated October 8, 2007

Setting Suspension Fork Height on Schatz and Kundo Standard 400 Day Clocks

October 7, 2007 | By | 4 Replies More
Setting Suspension Fork Height on Schatz and Kundo Standard 400 Day Clocks

After repairing numerous Schatz and Kundo standard size 400 day clocks recently, I have noticed that sometimes the optimum suspension fork location is different than that shown in the “Horolovar 400 Day Clock Repair Guide”. Specifically, for Kundo units such as 1 and 3C, I often find that the fork should be slightly higher. For […]

Read More

Last updated November 27, 2009

Ansonia Queen Elizabeth Wall Clock

September 28, 2007 | By | 6 Replies More
Ansonia Queen Elizabeth Wall Clock

I overhauled an Ansonia “Queen Elizabeth” wall clock, oak case, 37 inches tall, 8 day time only spring driven (my job no. 4446). The (probably) original mainspring is 0.0165 inches thick. After the overhaul, the running arc is about 1.4 times the escape arc. It is interesting that the movement is mounted tilted in the […]

Read More

Last updated March 30, 2011

Russell & Jones Hanging Oak Parlor Clock

September 27, 2007 | By | 5 Replies More
Russell & Jones Hanging Oak Parlor Clock

I just overhauled a lovely Russell & Jones hanging oak parlor clock. Height: 28 inches. It has a beautiful glass tablet with an image of a lighthouse. (My repair job no. 4341.) The movement is 8 day time and strike, with plate size approx. 5-3/8 x 3-3/8 The original strike mainspring was 0.016 inch thick, […]

Read More

Last updated November 27, 2009

A Walk Around the Old Westclox Factory, Peru, Illinois

September 23, 2007 | By | 1 Reply More
A Walk Around the Old Westclox Factory, Peru, Illinois

On Sunday, August 26, my wife Kimberly and I stopped at the old Westclox factory at Peru, Illinois on our way back from my nephew’s wedding in Wisconsin. The old factory is a huge place, 665,000 square feet on 16 acres of land. Across the street is the 57,000 square foot administration or office building. […]

Read More

Last updated November 27, 2009

Mainspring 3/4 by 0.0145 by 120 Inch

September 23, 2007 | By | Reply More
Mainspring 3/4 by 0.0145 by 120 Inch

Empire Clock Company offers a mainspring specified as 3/4 inch wide, 0.0145 inch thick and 120 inches long. It is part number 280-19-009 and is listed in their parts catalog. Their web site gives directions for ordering their clock parts catalog. This is a good mainspring for many Ansonia clocks. Share this post:

Read More

Last updated November 27, 2009

Dial: Replace or Leave Original?

September 16, 2007 | By | Reply More
Dial: Replace or Leave Original?

This paper dial is about 90% excellent, with some wear by the numbers 10 and 11. I prefer to leave a dial this good alone. Some restorers would replace it, or a good touch up artist could make it look better in the worn area while leaving the rest alone. Dial of Ansonia oak kitchen […]

Read More

Last updated November 27, 2009

Schatz 400 Day Clock with Black Trim

September 16, 2007 | By | Reply More
Schatz 400 Day Clock with Black Trim

I recently repaired this Schatz standard 400 day clock and am illustrating it because of the black trim and the design on the dial. The movement is dated 3 53 (March 1953). (My job No. 4428.) Share this post:

Read More

Last updated November 27, 2009

Schatz 400 Day Clock Repaired for the Schatz Family

September 16, 2007 | By | Reply More
Schatz 400 Day Clock Repaired for the Schatz Family

A family named Schatz sent me this Schatz standard 400 day clock for repair. A friend of theirs bought the clock at an auction for them because they wanted a clock bearing the family name. I overhauled the movement, replaced the suspension spring, and polished and lacquered the base. The clock is dated 12 58 […]

Read More

Last updated November 27, 2009