Seth Thomas Chiming Mantel Clock KENBURY-1W

This Seth Thomas Westminster chime mantel clock has a No. 124 movement. The cover on the back of the clock says “KENBURY-1W MODEL No. E- 705-003”.

The case is mahogany with a lighter wood inlay band across the bottom. The 1951 Seth Thomas catalog shows this clock. Height 8 3/8 inches, width 15 3/8 inches, minute hand length 2 3/8 inches.

Completed movement, side view Movement in case showing pendulum bob. Complete clock.

See more photos.

The No. 124 movement in this clock has the date code 5011 (November 1950) and the bottom of the case has the date code 5102 (February 1951).

Repair job 6682. This clock needed a lot of work. When I received it, the time and chime mainsprings had been swapped. The two spacers for the mainspring barrel plate were missing. several screws were missing. The teeth on the time mainwheel were damaged. I polished the pivots and installed 34 bushings! The sleeve that supports the chime shutoff lever was missing.

The No. 124 movement is an excellent runner, but will need overhauling when it stops working after years of use.


Share this post:

Facebooktwitterpinterestlinkedin

4 comments

  1. I’m wondering if someone can tell me if my Seth Thomas clock is authentic? Movement is brass stamped Seth Thomas. I removed the unsigned face and found consistent colour and no other mounting holes, and dust. I looked on s thomas web site and cant find it, also no match to the hands, beautiful roman numerals. I bought octagonal wall clock with pendulum 30 yrs ago, paper tag says its from 1863 Portsmouth Conn. thank you, David Hughes, Canada

  2. I purchased this exact mantle clock in hermiston oregon. Wonderful sound and very well maintained.

  3. My brother didn’t want my moms Seth Thomas Clock with key, he was going to toss it out!!! My parents converted it over to Electric Many years ago, when they both where alive. It still runs, it’s just the outside wood shell is bad, needs to be redone, I’m wondering how I go about?
    I was thinking I could lightly sand it, then paint it. I just don’t know if that would be the right way. Don’t know what kind of paint to use. If you could give any suggestions that would greatly appreciated!!!
    Thank you so much,
    Elaine

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.